Interior painting

Rooms that look finished — down to the last trim line.

Walls, ceilings, trim, doors, and cabinets, prepped properly and coated twice. See the color on your own walls before you commit, then get a written, itemized number.

Preview colors on your room
Interior living room repainted in a soft sage-teal with crisp white trim

What does interior painting actually include?

A complete interior repaint means a written room-by-room scope, furniture moved and covered, floors protected, drywall and caulk repairs sanded flush, stain-blocking primer over every repair and bare surface, and two full finish coats in a sheen chosen for that room's traffic and humidity. Trim, doors, and cabinets are brushed and rolled by hand rather than fast-sprayed.

A single room with trim is typically one working day; a 2,000–3,000 sq ft interior usually runs three to five days. Taulbee Painting finishes every job with a punch-list walk and logs your exact colors and sheens so touch-ups years later still match.

What we paint inside

Every surface gets the prep it actually needs — the finish coat is the last step, not the whole job.

Walls & ceilings

Full-room repaints in a washable finish, with drywall and corner-bead repairs sanded flush before any color goes on.

Trim, baseboards & casings

Brushed and back-rolled by hand for a crisp line where trim meets wall — not fast-sprayed with dry spray and drips.

Interior doors

Hardware removed, surfaces degreased and sanded, then finished in a hard enamel that resists fingerprints and scuffing.

Kitchen & bath cabinets

Degrease, de-gloss, prime with a bonding primer, and finish in a cabinet-grade enamel that cures hard enough for daily use.

Accent walls & feature colors

One wall or one room, laid out and taped so the transition line is dead straight — preview it in the visualizer first.

Stairwells & high ceilings

Properly staged with the right ladders and platforms so two-story entries and open stairwells get the same coverage as everything else.

Our interior process

1

Walk-through & written scope

We go room by room, note every surface and repair, and put an itemized number in writing before anything starts.

2

Protect & mask

Furniture is moved to the center and covered, floors are papered or dropped, and fixtures and hardware come off.

3

Repair

Nail pops, dings, cracks, and split caulk are filled, sanded flush, and re-caulked so the finish coat lays flat.

4

Prime

Stain-blocking primer over every repair, bare drywall, and problem stain so the color reads evenly in all light.

5

Two finish coats

Rolled and cut in twice for full, uniform coverage in the sheen chosen for that room's traffic and humidity.

6

Punch-list walk

We walk it with you, fix anything you point at, reinstall hardware, and log your colors for future touch-ups.

Which paint sheen for which room

Sheen decides how a room cleans and how much of the wall behind the paint you notice. This is the guide we use when writing a scope.

SheenBest forWhyCleanability
Flat / matteCeilings, low-traffic adult bedroomsHides drywall waves and patches better than any other sheenLow
EggshellLiving rooms, dining rooms, most bedroomsThe everyday balance of a soft look and a wipeable surfaceMedium
SatinHallways, kids' rooms, stairwells, laundry, mudroomsTakes repeated scrubbing without burnishing a shiny spotHigh
Semi-glossTrim, doors, cabinets, bathrooms, kitchen wallsSheds moisture and cooking grease instead of absorbing themVery high
High-glossAccent doors, select cabinetryMaximum depth and reflection, but it shows every underlying flawVery high

Common questions

Written and reviewed by Andrew Taulbee, owner of Taulbee Painting. Last updated . Questions about your own home? Call 513-594-7595 or email taulbeepainting2@gmail.com.

Get an interior painting estimate

Send your rooms, colors, and photos — we'll come back with a written, itemized number.

Email Taulbee 513-594-7595

Do it from your phone

Preview new colors on your actual walls and scan problem areas with the free iPhone app.